Skip to content
  • phone: 01634 869806
  • email:
Memtec

Benefits to Single Ply Roofing & Roof Waterproofing

WHY CHOOSE MEMTEC SINGLE PLY PVC ROOFING AND WATERPROOFING MEMBRANES:

  • A complete range of Memtec Roofing and Waterproofing Single Ply PVC Membranes to suit any type of roof, including all accessories.
  • Our flat roofing products and PVC flat roofing membranes are totally suitable for all constructions from small Domestic to large Commercial and Industrial size roofing projects.
  • 20 year documented Product Guarantee Certificate.
  • Memtec Single Ply PVC Roofing and Roof Waterproofing Products and Systems are suitable for all Flat Roof Constructions and situations (also for specifically designed pitched roofs).
  • BBA Approvals and Testing Certification with a BBA Documented and confirmed service life “in excess of 35 years”.
  • British Board of Agrément (BBA) Accredited, BBA Certificate number 14/5144.
  • BBA confirmed service life “in excess of 35 years”.
  • UV resistant.
  • Self extinguishing.
  • Rot proof and high ageing resistance.
  • Root penetration resistant.
  • Thermofusible laps and seams electronically hot air welded without the requirement of dangerous naked flame or hot bitumen.
  • Membranes are mesh reinforced providing maximum dimensional stability both crosswise and lengthwise.
  • Vapour permeable, no blisters.
  • Low temperature pliability minus 25 degrees centigrade without cracks.
  • Can either be mechanically fixed, fully bonded or loose laid and ballasted.
  • Lightweight, fast, clean installation.
  • Excellent aesthetic appearance.
  • Modern efficient performance and cost effective over many years.
  • NHBC Standards 2014.  NHBC accepts the use of Memtec Single Ply Flat Roofing Membrane types EBM, PBM and PBM-FB.
  • Full Product Technical and Product Installation Advice Back Up Service.
  • Memtec written project specific specification upon request.

BBA Guarantee Certificate

 

New modern buildings costing millions of pounds do not receive outdated, old fashioned and short service life Roofing Products and Systems and have not for many years now.  This continual investment in new construction developments is one of the main reasons for the dramatic decline in the employment of such Roofing Products and Systems, such as Bituminous Roofing Felts and Asphalt type Roofing Products and Systems.

So why not install a new modern, high performance and cost effective Memtec Single Ply PVC Membrane Roofing System on your property whether new or existing.

There are a wide range of benefits when you employ a Memtec Roofing System and which can all be explained in depth by Memtec’s experts.  Call our professional PVC roofing and roof waterproofing membrane engineers today on 01634 869806. We will be on hand to go through your requirements and will provide you with any information you need on our flat roofing membranes and roof waterproofing products.

Memtec BBA Certificate Number 14/5144.

The British Board of Agrément (The BBA) is an independent body which inspect, test and stringently monitor annually the Product (i.e all products employed in the UK Construction Industry).  If any product fails the BBA criteria it is not awarded a BBA Certificate.

Memtec’s BBA Certificate confirms a service life for the products “in excess of 35 years” which means that Memtec customers and clients can be totally assured of the quality and performance of Memtec Single Ply PVC Roofing Membrane types EBM, PBM and PBM-FB.

Memtec BBA Accreditation and BBA confirmed product service life “in excess of 35 years” means that the Memtec product is one of the very best long service life Roofing Products and membranes available in the UK today.

 

You can download the Memtec BBA Certificate by clicking here >>‚Äč

 

All Memtec’s Roofing and Waterproofing Membrane Products are installed safely and cleanly without any requirement for the use of dangerous boiling hot bitumen or naked flame gas torch unlike Bituminous Felt and Asphalt Roofing Products. You benefit from a professional installation and quality products when you work with us. With highly efficient flat roofing membranes and roof waterproofing products; you receive a quality solution that is made to last.

Memtec is installed by means of either cold applied adhesive or mechanical fixing (screwed) with electrically hot air welded overlap seams and general roof flashings.

Hot air welding process of the Memtec single Ply PVC membrane and roof detail accessories

The hot air turns the Memtec Single Ply PVC membrane molten to both layers, the pressure roller integrates the moulten PVC and as it cools instantly the two layers have become one forming an immensely strong, permanent and watertight seal.

Membrane Welding

Hot air welding an overlap seam.

Cover Flashing

Hot air welding of a cover flashing.

Welding Membrane Sheet

Hot air welding of the upstand flashing to the horizontal area membrane main field sheet.

Membrane Cover Flashing

Roof PVC faced drip edge trim and membrane cover flashing.

Welding of Roof Decoration

Hot air welding of roof decoration type decarib PVC profile (optional).

Installing Pipe Flashing

Installing a pipe flashing and hot air welding to the membrane main field sheet.

 

Contact Memtec today to discuss your PVC Roofing requirements or to request a Memtec Information Pack containing Brochure, Literature, Product Installation Guides, Price List and PVC and Roof Waterproofing Membrane Samples. By either telephone, fax or email.

 

EXISTING FLAT ROOF REFURBISHMENT BENEFITS:

Memtec Single Ply PVC Roofing Membrane and Flat Roofing Systems are perfect for existing flat roofs that require new roof coverings.

There are many advantages of employing a Memtec Ply Pvc Membrane Flat Roofing System or using our flat roofing products, encompassing:

  • In most cases there is no need to remove the existing failed old flat roof products and coverings which provides a big cost saving on labour to remove them and also rubbish skip disposal costs.  Providing the existing old roof coverings are still soundly bonded to existing roof deck and the existing roof deck is not showing signs of being rotten and is still sound Memtec Single Ply PVC Membrane type PBM-FB fleece backed can be applied over the existing old roof coverings.  Usually the existing old roof coverings would be either bituminous felt (all existing stone chippings need to be removed if applicable), mineral surface finished bituminous felt or asphalt (all existing stone chippings need to be removed if applicable).  Please carefully note Building Control Regulations should always be consulted when considering existing roof refurbishment projects in regards to the requirement to install insulation to comply with current Legal Obligations.
  • Documented 20 year Product Guarantee Certificate inclusive at no additional cost.
  • UV resistant.
  • Vapour permeable, no blisters.
  • Self extinguishing.
  • Rot proof and high ageing resistance.
  • Root penetrations resistant.
  • Thermofusible laps and seams electrically hot air welded without the requirement of dangerous naked flame or hot bitumen.
  • Membranes are mesh reinforced providing maximum dimensional stability both crosswise and lengthwise.
  • Memtec membrane Product Quality and Performance Assurance via Memtec BBA Certificate Number 14/5144 for membrane types EBM, PBM and PBM-FB and which also confirm the products service life to be “in excess of 35 years”.
  • Low temperature pliability minus 25 degrees centigrade without cracks.
  • NHBC (National House Building Council) Standards 2014.  NHBC accepts the use of Memtec Single Ply PVC Roofing Membrane types EBM, PBM and PBM-FB for all flat roofs.
  • Lightweight, fast clean installation.
  • Excellent aesthetic appearance.
  • Modern efficient performance and cost effective over many years.

THINKING ABOUT A FLAT ROOF REFURBISHMENT THINK MEMTEC

Top